|
|
Post by tuggle on Aug 30, 2013 8:08:27 GMT -10
Was reading were you can change a tj coil out to a zj coil to level the jeep. Anyone heard of such or done it. I was curious about it.
|
|
|
|
Coils
Aug 30, 2013 8:15:39 GMT -10
Post by shortbus on Aug 30, 2013 8:15:39 GMT -10
Was reading were you can change a tj coil out to a zj coil to level the jeep. Anyone heard of such or done it. I was curious about it. Spring heights are about the same spring rate is what is diff. will lift the jeep but ride rough. have you thought about a 2" puck up front that is what I have to put in mine on top of a 2.5" pro comp lift just have not done it yet. |
|
|
|
Coils
Aug 30, 2013 8:48:54 GMT -10
Post by slagjeep on Aug 30, 2013 8:48:54 GMT -10
Yeah I saw that on jp magazine's website. Wanna be the guinea pig?
|
|
|
|
Post by tuggle on Aug 30, 2013 9:27:32 GMT -10
Not sure if I want to try. At this moment it's food for thought
|
|
|
|
Coils
Aug 30, 2013 10:17:18 GMT -10
Post by dan99tj1 on Aug 30, 2013 10:17:18 GMT -10
I've seen two 4" lifts lately for $200 or less used
|
|
|
|
Post by tuggle on Aug 30, 2013 10:35:33 GMT -10
I want to do a 2 to 2.5 sooner or later. I am not in a hurry.
|
|
|
|
Coils
Aug 30, 2013 15:16:38 GMT -10
Post by dan99tj1 on Aug 30, 2013 15:16:38 GMT -10
I was fine with 31's, then 33's, then 35's, then 42's, now it's a full tube chassis!
|
|
|
|
Post by tuggle on Aug 30, 2013 15:31:32 GMT -10
It's a never ending cycle. Build, build, then start over.
|
|
|
|
Coils
Aug 30, 2013 16:33:42 GMT -10
Post by rewind on Aug 30, 2013 16:33:42 GMT -10
Just Empty Every Pocket
|
|
