sawyer
Mall Crawler
Posts: 34
Ride info: 1995 yj, 2.5 lift, 31 mud's, winch, toe strap, tons more
|
Post by sawyer on May 3, 2014 14:33:19 GMT -10
so the next thing i need to do to my yj is to replace the old broken and falling off body mounts. i have done a lot of research into it and realized there is no way i can do it by myself. im fairly sure that most of the bolts will spin the nutserts loose and will need to be cut off from the top and new nutserts welded in place. my question is how difficult would it be to do all this if i was in a shop with the right tools and someone who knows how to use them?(i can sort of weld and sort of use a plasma cutter, but not in a such a way were i can safely do it on my vehicle) should i just take it somewhere and pay the extra money for them to put it on?(im assuming this would be really really expensive)the next question is will all the extra effort of having to cut most of the bolts out make it harder to replace with a 1 inch body lift? i was thinking of going with a daystar complete polyurethane replacement instead of the hard pucks. suggestions, comments, experience advice would be awesome
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 3, 2014 17:44:13 GMT -10
Contact CHEEZO.
|
|
|
Post by dave95yj on May 4, 2014 4:41:23 GMT -10
What Dale said! Look up our old posts to see some before and after photos of our YJ's and Cheezo's work.
|
|