|
Post by timt97 on Jul 2, 2014 3:52:12 GMT -10
Man that looks good!
Sent from my iPhone using Tapatalk
|
|
|
Post by slagjeep on Jul 2, 2014 7:33:59 GMT -10
Thanks guys. My evil plan is finally coming together!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 2, 2014 12:50:54 GMT -10
Lookin' good Grady!
|
|
|
Post by slagjeep on Jul 12, 2014 7:55:11 GMT -10
Fixed my transfer case shift linkage this morning. I don't know how the torque shaft popped out of its bracket, but it was a breeze to fix. Just popped off the bracket, put on my new bushing, and bolted everything back together.
So now I am officially in business for HPO later this month. Should have end caps for my bumper by then and I'm working on the electrical gremlins in my winch.
|
|
|
Post by slagjeep on Jul 13, 2014 16:56:58 GMT -10
Electrical gremlins have been zapped! Turns out a bad connection or broken wire is what caused my winch not to go out this whole time. Now I need to go through the internals and make sure everything is still there as well as grease everything since it's been in pieces for at least a year. I'm on track to get everything I wanted to get done before the HPO trip. Transfer case linkage...check Winch...half check Bumper endcaps...on schedule Then I wanna either do the ZJ tie rod or new brakes. Can't decide which one will be more important up there. This is the design I'm getting cut into my endcaps
|
|
|
Post by dan99tj1 on Jul 13, 2014 17:00:11 GMT -10
I'm jeslous
|
|
|
Post by slagjeep on Jul 13, 2014 17:18:16 GMT -10
Of what Danno? Going to HPO?
|
|
|
Post by slagjeep on Jul 20, 2014 14:37:03 GMT -10
|
|
|
Post by dan99tj1 on Jul 21, 2014 11:34:27 GMT -10
Keeps getting better Grady, good job
|
|
|
Post by slagjeep on Jul 21, 2014 12:42:26 GMT -10
Keeps getting better Grady, good job Preciate it. Any progress on the buggy?
|
|
|
Post by dan99tj1 on Jul 22, 2014 9:11:57 GMT -10
Not enough to talk about
|
|
|
Post by Dewstr1 on Jul 22, 2014 9:41:14 GMT -10
Grady, you should put some kind of lights behind that cut-out. That would look SHARP!
|
|
|
Post by slagjeep on Jul 22, 2014 10:41:31 GMT -10
That's the plan. Either that or paint some plate white or red and tack it behind there.
|
|
|
Post by slagjeep on Jul 23, 2014 16:57:24 GMT -10
May not be able to finish the winch by Friday...all because of some grease. Can't find any Mollylube 1 or Aeroshell 33ms.
|
|
|
Post by slagjeep on Mar 22, 2015 15:57:40 GMT -10
I'm back! I've been busy going to school full time and working too much, so I haven't had much free time to surf the web like you cool cats.
Most of what I've done to the Honkey Bison lately is just fixing my death wobble. I think I've bout gotten it whooped, but we'll see after I get the ball joints replaced.
List of stuff I've replaced and/or upgraded: Trackbar (Metalcloak now) Tie rod (ZJ Tie Rod) Drag link All tie rod ends Shocks (Bilstein 5100) Steering stabilizer (Duct tape while I replaced all this stuff) Ball joints (Currently in progress)
I'm hoping to make it to HPO this weekend.
|
|